3D-Colour Print (CJP Sandstone) – Mask 120 mm


Mask and a separate set of eyes, printed in CJP full colour, sandstone, 12cm high, matt acrylic seal for the mask, eyes remain unsealed

  • Clear


Product Description

3D-sandstone prints – Good to know!

Material Information:

Each 3D-printed model is a uniquely manufactured product and made of sandstone 3D print material (powdery raw material, hard and brittle when processed into final products). You may see slight colour deviations between the model in your 3D-viewer and the final print product. These occur due to the special print manufacturing process, that is subjected to technical constraints. Depending on the scale, there will be differences in the level of details visible, i.e. the larger the prints the more details can be printed.

Safety & Health instructions:

The figurines are unsuitable for playing and should be kept out of reach of small children.
Do not lick, swallow or eat parts of the figure as it may cause health issues including but not limited to suffocation and poisoning.
If the figure breaks and/or shatters please be aware that it could have sharp edges that may cause injuries when touched. Please dispose of the figure properly in this case.
As this product contains flammable material please keep it away from heat or fire.

Product care instructions:

Keep out of direct sunlight for extended periods of time to prevent colours from fading.
Keep away from water and humid conditions as this may damage the surface of the figure and causes the colours to fade as well.
Only clean with a dry soft cloth.

Additional information

  • 0.8 kg
  • 24 × 8 × 8 cm
  • Size S – 12 cm, Size M2 – 16 cm, Size L – 21 cm


There are no reviews yet.

Be the first to review “3D-Colour Print (CJP Sandstone) – Mask 120 mm”

Recommended Products

Show Buttons
Share On Facebook
Share On Twitter
Share On Linkedin
Contact us
Hide Buttons